Deliverable

 
Free preview
Price
Language
 
ILNAS-EN ISO 80601-2-12:2020 Edition 03/2020
Medical electrical equipment - Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators (ISO 80601-2-12:2020)
  •   
  •   
  •   
  •  
  • 0.00 / copy
  •  
 

Abstract

This document applies to the basic safety and essential performance of a ventilator in combination with its accessories, hereafter referred to as ME equipment: intended for use in an environment that provides specialized care for patients whose conditions can be life-threatening and who can require comprehensive care and constant monitoring in a professional healthcare facility; NOTE 1 For the purposes of this document, such an environment is referred to as a critical care environment. Ventilators for this environment are considered life-sustaining. NOTE 2 For the purposes of this document, such a ventilator can provide transport within a professional healthcare facility (i.e. be a transit-operable ventilator). NOTE 3 A critical care ventilator intended for use in transport within a professional healthcare facility is not considered as an emergency medical services environment ventilator. intended to be operated by a healthcare professional operator; and intended for those patients who need differing levels of support from artificial ventilation including for ventilator-dependent patients. A critical care ventilator is not considered to utilize a physiologic closed-loop-control system unless it uses a physiological patient variable to adjust the ventilation therapy settings. This document is also applicable to those accessories intended by their manufacturer to be connected to a ventilator breathing system, or to a ventilator, where the characteristics of those accessories can affect the basic safety or essential performance of the ventilator. NOTE 4 If a clause or subclause is specifically intended to be applicable to ME equipment only, or to ME systems only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME equipment and to ME systems, as relevant. Hazards inherent in the intended physiological function of ME equipment or ME systems within the scope of this document are not covered by specific requirements in this document except in IEC 60601-1:2005, 7.2.13 and 8.4.1. NOTE 5 Additional information can be found in IEC 60601-1:2005+AMD1:2012, 4.2. This document is not applicable to ME equipment or an ME system operating in a ventilator-operational mode solely intended for patients who are not dependent on artificial ventilation. NOTE 6 A critical care ventilator, when operating in such a ventilator-operational mode, is not considered life-sustaining. This document is not applicable to ME equipment that is intended solely to augment the ventilation of spontaneously breathing patients within a professional healthcare facility. This document does not specify the requirements for: ventilators or accessories intended for anaesthetic applications, which are given in ISO 80601-2-13[2]; ventilators or accessories intended for the emergency medical services environment, which are given in ISO 80601-2-84[3], the future replacement for ISO 10651-3[4]; ventilators or accessories intended for ventilator-dependent patients in the home healthcare environment, which are given in ISO 80601‑2-72:2015[5]; ventilators or accessories intended for home-care ventilatory support devices, which are given in ISO 80601-2-79:2018[6] and ISO 80601-2-80:2018[7][1]; obstructive sleep apnoea therapy ME equipment, which are given in ISO 80601‑2‑70[9]; continuous positive airway pressure (CPAP) ME equipment; high-frequency jet ventilators (HFJVs) and hi

Status

Standard - Active

Origin

Technical Committee :
CEN/TC 215 : Respiratory and anaesthetic equipment

Implementation

start of the vote on the project    09/08/2018   date of ratification (dor)    12/11/2019
end of the vote on the project    02/10/2018   date of anouncement (doa)    30/06/2020
start of the vote on the final project    15/08/2019   date of publication (dop)    30/09/2020
end of the vote on the final project    11/10/2019   date of withdrawal (dow)    30/09/2020


Publication Official Journal
of the Grand-Duchy of Luxembourg
Reference

Relations

Relations to older standards
ILNAS-EN ISO 80601-2-12:2011
ILNAS-EN ISO 80601-2-12:2011/AC:2011

Relations to international standards
ISO 80601-2-12 
ISO 80601-2-12:2020 

International Classification for Standards (ICS codes) :

11.040.10 : Anaesthetic, respiratory and reanimation equipment

Login

magnifying icon

Search a standard

Advanced search

Help

Satisfaction enquiry

Newsletter

Free of charge lifelong learning "Standardization"

Standards organizations

  • National standards

  • European standards

  • International standards



X

Your feedback is important to us!


Would you be willing to give us a short feedback?

 

Thank you for helping us

Warning:
DIN standards can be downloaded only once! After downloading, they are no longer available in the eLibrary.
Begin download?