magnifying icon Warenkorb

Der Warenkorb ist leer
Login

Login

ANGEMELDET ALS

Hilfe

Kundenumfrage

Newsletter

Kostenfreie weiterbildung "Normung"

KOSTENFREIE WEITERBILDUNG "NORMUNG"

Normung

Normen-Entwürfe

Normungsorganisationen

NORMUNGSORGANISATIONEN

  • Nationale Normen

  • Europäische Normen

  • Internationale Normen


Veröffentlichung

 
Kostenlose Vorschau
Gesamtbetrag
Sprache
 
ILNAS-EN 9300-125:2023 Edition 11/2023
Luft- und Raumfahrt - LOTAR - Langzeit-Archivierung und - Bereitstellung digitaler technischer Produktdokumentationen, wie zum Beispiel von 3D , CAD und PDM-Daten - Teil 125: Eindeutige CAD-Baugruppenstruktur mit grafischen Produkt und Fertigungsinformationen (PMI)
  •   
  •   
  •  
  • 36.2 / Kopie
  •  
 

Abstract

1.1 Introduction This document defines the requirements for the long-term digital preservation of the presentation of Product and Manufacturing Information (PMI) with their possible links to the 3D explicit shape and geometry of CAD assembly structure. The goal is to preserve this 3D information, without loss, with respect to the geometry produced by the original CAD system, following the principles laid down in EN 9300 003 “Fundamentals and Concepts”. This will allow the retrieval of the assembly structure including the placement information. This standard extends EN 9300-115 “Explicit CAD Assembly Structure” by including assembly level PMI. PMI for the assembly structure can be recorded in the same file as the geometry, can be in a nested assembly structure or the PMI will be contained in its own separate file (Side-Car). The PMI elements shall be presented on the graphic level only (i.e. polyline, tessellated). 1.2 Out of scope The following is outside the scope: - The archiving of assembly Form Features. - Semantic PMI representation is out of scope for this document. - The geometry defined at assembly level is out of scope for this document. (This document covers PMI at the assembly level only.)

Status

Standard - Aktiv

Ursprung

Technisches Komitee :
ASD-STAN : Luft- und Raumfahrzeuge

Annahme

Beginn der Abstimmung über den Entwurf    02/06/2022   Datum der Ratifizierung (dor)    22/12/2019
Ende der Abstimmung über den Entwurf    25/08/2022   Datum der Ankündigung (doa)    29/02/2024
Beginn der Abstimmung über den Schlussentwurf    26/09/2019   Datum der Veröffentlichung (dop)    31/05/2024
Ende der Abstimmung über den Schlussentwurf    21/11/2019   Datum der Zurückziehung (dow)    31/05/2024


Veröffentlichung im Amtsblatt
des Grossherzogtum Luxemburg
Referenz

Internationale Normungsklassifizierung (ICS) :

01.110 : Technical product documentation

magnifying icon Warenkorb

Der Warenkorb ist leer


Achtung:
DIN-Normen können nur einmal heruntergeladen werden! Nach dem Herunterladen, sind sie nicht mehr in der eBibliothek verfügbar.
Download starten?