Free preview
prEN IEC 61000-4-6:2022 Edition 11/2023
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
  • 86.90 / copy


This part of IEC 61000 relates to the conducted immunity requirements of electrical and electronic equipment to electromagnetic disturbances coming from intended radio-frequency (RF) transmitters in the frequency range 150 kHz up to 80 MHz. NOTE 1 Product committees might decide to use the methods described in this document also for frequencies up to 230 MHz (see Annex B) although the methods and test instrumentation is intended to be used in the frequency range up to 80 MHz. Equipment not having at least one conducting wire and/or cable (such as mains supply, signal line or earth connection) which can couple the equipment to the disturbing RF fields is excluded from the scope of this publication. NOTE 2 Test methods are specified in this part of IEC 61000 to assess the effect that conducted disturbing signals, induced by electromagnetic radiation, have on the equipment concerned. The simulation and measurement of these conducted disturbances are not adequately exact for the quantitative determination of effects. The test methods specified are structured for the primary objective of establishing adequate repeatability of results at various facilities for quantitative analysis of effects. The object of this standard is to establish a common reference for evaluating the functional immunity of electrical and electronic equipment when subjected to conducted disturbances induced by RF fields. The test method documented in this part of IEC 61000 describes a consistent method to assess the immunity of an equipment or system against a specified phenomenon. NOTE 3 As described in IEC Guide 107, this standard is a basic EMC publication for use by product committees of the IEC. As also stated in Guide 107, the IEC product committees are responsible for determining whether this immunity test standard should be applied or not, and if applied, they are responsible for determining the appropriate test levels and performance criteria.


Draft - Active


Technical Committee :
CLC/TC 210 : Electromagnetic Compatibility (EMC)


start of the vote on the project    15/04/2022   date of ratification (dor)    07/09/2023
end of the vote on the project    08/07/2022   date of anouncement (doa)    07/02/2024
start of the vote on the final project    26/06/2023   date of publication (dop)    07/05/2024
end of the vote on the final project    07/08/2023   date of withdrawal (dow)    07/05/2024

Publication Official Journal
of the Grand-Duchy of Luxembourg


Relations to older standards
ILNAS-EN 61000-4-6:2014/AC:2015

Relations to international standards
IEC 61000-4-6 ED5 

International Classification for Standards (ICS codes) :

33.100.20 : Immunity


magnifying icon

Search a standard

Advanced search


Satisfaction enquiry


Free of charge lifelong learning "Standardization"

Standards organizations

  • National standards

  • European standards

  • International standards


Your feedback is important to us!

Would you be willing to give us a short feedback?


Thank you for helping us

DIN standards can be downloaded only once! After downloading, they are no longer available in the eLibrary.
Begin download?